How To Wash Allerease Mattress Protector: Simple Steps and Common Questions

If you’re wondering how to wash Allerease mattress protector without shrinking it, damaging the waterproof layer, or reducing its effectiveness, you’re in the right place. This FAQ-style guide walks you through the safest way to clean it, how often to wash, and what to avoid to help keep your sleep surface fresh.

What is an Allerease-style Mattress Protector and Why Does Washing Matter?

A mattress protector like this typically combines a soft outer fabric with a protective inner layer designed to block moisture, spills, and common household particles from reaching your mattress.

Keeping it clean matters because:

  • It helps maintain a fresher sleep surface.
  • It can protect your mattress from stains and odors.
  • It may help reduce buildup of dust, sweat, and everyday debris on the surface you sleep on.

Washing correctly is important so you don’t damage seams, zippers, or the waterproof/breathable backing.

How To Wash Allerease Mattress Protector: Step-by-Step

Before anything else, always check the care label sewn into your specific protector. Instructions can vary slightly by model.

In general, here’s how to wash an Allerease-style mattress protector:

  1. Remove from the mattress

    • Unzip (if it fully encases the mattress) and gently slide it off.
    • Shake it over a laundry basket or outside to remove loose debris.

  2. Pre-treat any stains

    • Dab stains with a small amount of mild detergent and cool water.
    • Avoid harsh scrub brushes or bleach, which can weaken fabric and backing.

  3. Machine wash on gentle

    • Use cold or warm water (not hot) on a gentle or delicate cycle.
    • Add a small amount of mild liquid detergent.
    • Wash it by itself or with other lightweight bedding (not heavy towels or jeans).

  4. Skip fabric softeners and bleach

    • Fabric softeners and bleach can damage waterproof layers and reduce the protector’s performance.

  5. Rinse thoroughly

    • If your washer has an extra rinse option, it can help remove any leftover detergent from the fabric and backing.

This approach helps answer the core question of how to wash Allerease mattress protector safely without unnecessary wear.

Can You Put an Allerease Mattress Protector in the Dryer?

Often, yes—but heat is the main risk. Again, follow the exact instructions on your label first. When allowed, a common approach is:

  • Tumble dry on low heat or air dry setting.
  • Avoid high heat, which can melt, crack, or warp the waterproof layer.
  • Remove promptly once dry to help prevent wrinkles and bunching.

If you prefer, you can also air dry by laying it flat or hanging it over a drying rack. Just make sure it is fully dry before putting it back on the mattress to avoid trapped moisture.

How Often Should You Wash It?

How often to wash an Allerease-style mattress protector depends on use:

  • Typical use: About every 1–2 months
  • During hot weather, if you sweat heavily, or with spills: More frequently, as needed
  • After a significant spill or accident: Wash as soon as possible

Regular washing helps keep the surface fresher, but washing too often on hot settings or with harsh chemicals can shorten its lifespan.

What Should You Avoid When Washing?

To keep the protector in good shape:

  • 🚫 Avoid hot water – it can shrink fabric and weaken backing.
  • 🚫 Avoid bleach or strong stain removers – they may damage fibers and coatings.
  • 🚫 Avoid ironing – high heat from an iron can ruin the protective layer.
  • 🚫 Avoid dry cleaning – chemicals used in dry cleaning may not be suitable.
  • 🚫 Avoid overloading the washer – tight cramming can strain seams and zippers.

How Do You Put It Back On the Mattress?

Once you’ve followed the steps for how to wash Allerease mattress protector and it’s completely dry:

  1. Make sure the protector is inside-out in the correct orientation if it’s an encasement (zipper at the right end).
  2. Slide it over one end of the mattress and gently work it down.
  3. Carefully zip it up, avoiding catching fabric in the zipper.
  4. For fitted-style protectors, pull the corners over the mattress like a fitted sheet, smoothing out wrinkles.

A smooth, properly fitted protector helps sheets lay flat and stay in place.

What If Your Protector Feels Different After Washing?

Sometimes, people notice minor changes after washing, such as:

  • Slight stiffness in the backing if dried on higher heat
  • Mild wrinkling of the fabric surface
  • Less “crinkly” feel once the protector has been washed a few times

These are generally normal as long as there are no visible cracks, peeling, or holes in the backing. If the waterproof layer appears damaged, the protector may no longer perform as originally intended.

✔️ Quick Mattress Takeaways

Key points consumers should understand about how to wash Allerease mattress protector:

  • Check the care label first – follow those instructions over any general advice.
  • Use cold or warm water on a gentle cycle with mild detergent.
  • Skip bleach, fabric softeners, and ironing to protect the backing.
  • Dry on low heat or air dry; avoid high heat to prevent damage.
  • Wash every 1–2 months under normal use, and promptly after spills.
  • Inspect the backing after washing for signs of cracking or peeling.
  • Ensure it’s fully dry before putting it back on the mattress.

Handled with these steps in mind, your mattress protector can stay cleaner and last longer, helping keep your mattress in better condition over time.