What Are The Dimensions Of An RV Queen Mattress? A Clear Size Guide

If you’re shopping for a mattress for your camper or motorhome and wondering “What Are The Dimensions Of An RV Queen Mattress”, you’re not alone. RV mattress sizes don’t always match standard residential sizes, and that can be confusing when you’re trying to measure a tight space or replace an existing mattress.

This FAQ-style guide explains what an RV queen is, how it differs from a standard queen, and what to keep in mind before you buy.

What exactly is an RV queen mattress?

An RV queen mattress is a queen-size mattress that’s designed specifically to fit in recreational vehicles, travel trailers, fifth wheels, and camper vans.

In most cases, an RV queen is slightly shorter or narrower than a traditional residential queen to save space and fit built-in platforms.

What Are The Dimensions Of An RV Queen Mattress?

When people ask “What Are The Dimensions Of An RV Queen Mattress”, they are usually trying to confirm whether it will fit their existing RV bed frame or bedding.

The most commonly used RV queen sizes are:

*The home queen size is shown to highlight that many RV queens are shorter than a traditional queen.

Because RV manufacturers can vary, you may see small differences of an inch or two, especially in older models or custom builds.

How is an RV queen different from a standard queen mattress?

The main differences are:

• Length: Many RV queens are 5–8 inches shorter than a standard 60" x 80" queen.
• Fit: RV queen mattresses are built to fit specific platforms, slide-outs, or corners in RVs.
• Shape: Some RV mattresses have rounded corners or cutouts to allow clearance for doors or aisles.

This is why a regular queen mattress from a typical bedroom may hang over the edge or block cabinet doors if placed directly into some RVs.

Why do RV queen sizes matter?

Knowing What Are The Dimensions Of An RV Queen Mattress matters for several reasons:

• Space planning: RVs have limited room. A mattress that’s too long or wide can make it hard to walk around the bed or use storage.
• Bedding compatibility: Sheets, mattress protectors, and toppers need to match the length and width to stay in place.
• Installation: Many RV beds are in tight spaces, corners, or slide-outs where an oversized mattress can’t be maneuvered easily.
• Comfort setup: If you plan to add a topper, you may need to allow for that extra height and confirm that cabinets or windows still open freely.

How do I measure my RV bed for the correct queen size?

To choose the right size, measure the platform or current mattress:

1. Remove all bedding so you can see the full edges.
2. Measure width from side to side at the widest point.
3. Measure length from head to foot, including any rounded corners or angles.
4. If corners are rounded or cut, measure:
   • Straight length to the start of the curve.
   • The radius or depth of the curve, if possible.
5. Compare your numbers to common RV queen dimensions like 60" x 75" or 60" x 74".

If your measurements don’t match a typical size exactly, your RV may use a custom or modified queen. In that case, it can help to choose the closest size that will fit the platform without overhang.

Will regular queen sheets fit an RV queen mattress?

Sometimes, but not always.

• On a 60" x 75" RV queen, standard queen sheets (made for 60" x 80") can be a bit loose at the foot of the bed.
• On a short RV queen (for example 60" x 72"), sheets may bunch up even more unless they’re labeled specifically for RV or short queen sizes.

If you use standard queen sheets on a shorter mattress, you can often:

• Tuck excess fabric tightly under the foot of the mattress.
• Use sheet straps or clips under the mattress to keep them in place.

What should I consider beyond dimensions?

Once you know What Are The Dimensions Of An RV Queen Mattress that will fit your space, a few other practical points can help:

• Height (thickness): A very thick mattress can make it harder to sit up in bed or reach overhead cabinets.
• Weight: Heavier mattresses may be less convenient in RVs with lift-up storage under the bed or where you frequently move cushions and bedding.
• Access: Consider how you’ll get the mattress into the RV. Narrow doors or tight hallways can make very stiff or bulky mattresses more challenging to install.
• Platform style: Some RV beds have hinged or folding platforms, so the mattress length and flexibility may need to accommodate that.

✅ Quick Mattress Takeaways

Key points to understand about “What Are The Dimensions Of An RV Queen Mattress”:

• Most common RV queen size: Around 60" x 75", shorter than a standard 60" x 80" home queen.
• Short RV queens: Often 60" x 72"–74", designed to save space in smaller rigs.
• Sizing varies by RV: Always measure your platform or current mattress before choosing a size.
• Standard queen isn’t always a match: A regular bedroom queen may be too long or awkward in many RV layouts.
• Bedding fit can differ: Standard queen sheets may work but can be loose on shorter RV queens.
• Shape and corners matter: Some RV queens have rounded or angled corners, so length and width alone may not tell the full story.

With a clear understanding of RV queen dimensions and how they compare to standard sizes, it becomes much easier to choose a mattress and bedding that fit both your RV and your comfort needs.