How To Reconnect Sleep Number Bed To Wifi: Step‑By‑Step FAQ Guide

If you’re searching for “How To Reconnect Sleep Number Bed To Wifi”, you’re likely dealing with a bed that suddenly stopped syncing, an app that won’t connect, or a new router or network. This guide walks through common reasons the connection drops and how to get your bed back online in clear, simple steps.

Why does my adjustable air bed lose its Wi‑Fi connection?

Smart beds that use air chambers and remote or app controls rely on a small control unit and your home Wi‑Fi. Connection problems usually come from:

A changed network (new router, new password, or different network name)
Weak Wi‑Fi signal where the control unit is located
A temporary glitch in the bed’s control system
Power loss or unplugged cables
App settings that need to be refreshed

Understanding these basics helps you narrow down why you need to figure out how to reconnect Sleep Number bed to wifi in the first place.

How To Reconnect Sleep Number Bed To Wifi: Basic Steps

Below is a general step‑by‑step outline many owners follow when reconnecting a smart air bed to Wi‑Fi. Exact steps can vary by model and app version, but the overall flow is similar.

1. Confirm your Wi‑Fi is working

Before touching the bed:

Make sure other devices (like your phone) can connect to the same network.
Check that you’re on a 2.4 GHz network, since many smart devices do not support 5 GHz only networks.
Note your network name (SSID) and password in case you need to re-enter them.

If your home network changed, the bed will not automatically know the new name or password.

2. Check the bed’s power and control unit

The bed’s control system needs steady power to connect.

Verify the power cord is firmly plugged into the outlet and the control unit.
Look for indicator lights on the control unit:
- A steady or blinking light often means it is powered and trying to connect.
- No lights can indicate a power issue or loose cable.
If you use a power strip, make sure it is switched on and not overloaded.

A simple power check often resolves intermittent drop‑outs.

3. Restart the bed and your router

Many connectivity issues clear with a restart:

Unplug the bed’s control unit from power for about 30–60 seconds.
Restart your Wi‑Fi router by unplugging and re‑plugging it, if possible.
Plug the control unit back in and wait a couple of minutes for it to reboot.

Once both devices are fully back on, move to the app.

4. Reconnect through the mobile app

Most users control their bed via a companion app. To continue with how to reconnect Sleep Number bed to wifi, you’ll typically:

Open the bed’s official app on your phone.
Make sure your phone is connected to the same home Wi‑Fi network you want the bed to join.
Go to settings, bed settings, or Wi‑Fi/network options.
Choose something like “Set up Wi‑Fi,” “Reconnect,” or “Change network.”
Follow on‑screen prompts:
- Select your Wi‑Fi network name from the list.
- Enter your Wi‑Fi password carefully.
Wait for the app to confirm a successful connection.

If the app cannot find the bed, you may be asked to press a button on the control unit or follow a brief pairing procedure.

What if my phone can’t find the bed during setup?

This is a frequent follow‑up issue when learning how to reconnect Sleep Number bed to wifi.

Common checks:

Stand close to the bed, near the control unit.
Make sure Bluetooth and Wi‑Fi are both enabled on your phone if the app requires them.
Confirm that only one person is trying to connect at a time; multiple devices can sometimes interfere.
Ensure the bed is powered on and not in the middle of a reboot.

If detection continues to fail, repeating the power‑cycle and app restart sequence can help.

How do I know if the Wi‑Fi signal is strong enough?

Smart bed control units are often placed under or beside the bed, which can weaken Wi‑Fi signals.

Signs of a weak signal include:

Frequent disconnects
Slow or failed app commands
Inconsistent updates or data in the app

Ways to improve signal:

Move your router closer to the bedroom if possible.
Avoid placing the router behind thick walls or inside enclosed cabinets.
If your network supports it, use a 2.4 GHz band, which often reaches farther than 5 GHz.
Consider a Wi‑Fi extender in the bedroom to strengthen coverage.

Why won’t my bed reconnect after I changed my router or password?

Any time you:

Change your Wi‑Fi password
Rename your network (SSID)
Replace your router
Switch internet providers

Your bed still tries to connect with the old network details.

You will need to:

Forget or reset the bed’s current Wi‑Fi settings (if the app offers this).
Go through the Wi‑Fi setup process as if it were a new bed, entering the updated network name and password.
Double‑check that you are not accidentally connecting to a guest network or a 5 GHz‑only network.

When should I consider a factory reset?

If you’ve:

Checked power
Verified Wi‑Fi strength
Restarted everything
Repeated app setup

…and you still cannot reconnect, some models allow a factory reset of the control system. This typically:

Clears stored Wi‑Fi information
Resets bed settings to defaults
Requires going through initial setup again in the app

Because resets can erase personalized settings, they’re usually a last step after trying simpler fixes.

✅ Quick Mattress Takeaways

Key points consumers should understand about How To Reconnect Sleep Number Bed To Wifi

Start simple: Confirm home Wi‑Fi works and your phone is on the correct network.
Power matters: Check that the bed’s control unit is powered and indicator lights are on.
Restart both sides: Unplug and reboot the bed’s control unit and router, then try reconnecting.
Use the app: Most reconnections are done in the app via Wi‑Fi or network settings.
Mind the signal: Weak Wi‑Fi near the bed can cause repeated disconnects.
Network changes require setup: New routers, names, or passwords mean the bed must be re‑set up on Wi‑Fi.
Factory reset is last: Only consider a full reset if all other troubleshooting steps fail.

With these steps and checks, most people can work through how to reconnect Sleep Number bed to wifi and restore app control and smart features without needing advanced technical knowledge.