How To Deflate Sleep Number Bed: Step‑by‑Step FAQ Guide

If you’re searching for “How To Deflate Sleep Number Bed”, you’re likely getting ready to move, store your mattress, or troubleshoot an air issue. This guide walks through the process in a clear, safe, and brand‑specific way, with answers to common questions along the way.

What does it mean to deflate a Sleep Number–style air bed?

These adjustable air beds use internal air chambers and a connected pump to control firmness.

To deflate the bed means to release most or all of the air from those chambers so the mattress is easier to move, pack, or inspect.

Fully or mostly deflating helps when you:

  • Move the bed to another room or home
  • Disassemble the frame or base
  • Pack the mattress for storage
  • Check for air leaks or connection issues

How To Deflate Sleep Number Bed: Basic Steps

The exact steps can vary by model, but most follow a similar pattern. Always check your original instructions if available.

1. Prepare the bed and area

  • Unplug accessories like heating pads or nearby electronics.
  • Remove bedding: sheets, blankets, mattress protector, and topper.
  • Make sure you have enough space around the mattress to walk and lift safely.

2. Locate and power the pump system

Most adjustable air beds use either:

  • A remote with a wired or wireless connection, or
  • A smartphone app that controls inflation/deflation.

Ensure the pump/control unit is:

  • Plugged into a working outlet
  • Turned on or ready to receive commands

3. Use the controls to reduce firmness

On most systems, you’ll:

  • Select your side (left/right) if it’s a dual‑chamber mattress
  • Press the “down” or “softer” button
  • Hold until the display or app shows a lower firmness setting

To deflate as much as possible using the built‑in controls, continue until the bed reaches the lowest firmness level offered. This often leaves a small amount of air in the chambers but makes the mattress noticeably softer and lower.

4. For deeper deflation: disconnect air hoses (if recommended)

Some models allow manual air release through the air hoses near the pump. Only do this if your instructions describe it, and follow them closely. A common pattern is:

  • Power off and unplug the pump for safety.
  • Gently access the hose connections where the mattress connects to the pump.
  • Press or pull any indicated release mechanism while carefully loosening the hose.
  • Let air slowly escape from the chamber.

Do not cut, puncture, or force anything open. If resistance is strong, stop and review your manual.

Can I fully deflate the bed until it’s flat?

Many people searching “How To Deflate Sleep Number Bed” want it completely flat for moving or storage. There are a few things to keep in mind:

  • A small amount of air is often recommended to help protect the internal structure.
  • Over‑compressing or folding the mattress too tightly while totally airless may stress the seams or materials.
  • If you’re storing the mattress long‑term, check guidance that may suggest keeping it partially inflated, stored flat, and away from sharp objects, heat, or moisture.

When in doubt, aim for mostly deflated but not aggressively compressed.

How do I deflate each side of a dual‑chamber bed?

Many adjustable air beds have separate left and right chambers. To deflate:

  1. Use the remote/app to select Side A.
  2. Lower the firmness to the minimum level.
  3. Repeat for Side B.

If manual hose release is allowed, treat each side individually, making sure you don’t pull or twist connectors between chambers.

Is it safe to move the mattress while it’s still partly inflated?

You can usually move the mattress when it’s significantly deflated and flexible, but consider:

  • A firm, fully inflated mattress is heavier and more awkward to grip.
  • A completely limp mattress can fold or bend in ways that strain internal parts.

Many people find a soft, mostly deflated state works best: the mattress is lighter and more manageable but still keeps some structure.

Common problems when deflating (and what to check)

The bed doesn’t seem to deflate

  • Make sure the pump has power and the remote or app is connected.
  • Confirm you’re adjusting the correct side or zone.
  • Hold the “down/softer” button long enough; some systems deflate gradually.

The mattress reinflates on its own

Some smart systems maintain a target firmness. If that’s the case:

  • Lower the target setting to the minimum level.
  • Temporarily unplug the pump once you reach your desired softness for moving or storage.

Air escapes very quickly or unevenly

If you manually disconnect hoses and the air rushes out suddenly, gently control the release so the mattress doesn’t snap or twist. If you hear persistent loud hissing from an unusual area, it may indicate a leak that needs inspection.

✅ Quick Mattress Takeaways

Key points consumers should understand about How To Deflate Sleep Number Bed

  • Use the built‑in controls first to lower firmness to the minimum setting.
  • Deflate both sides separately on dual‑chamber models.
  • For deeper deflation, only disconnect hoses if your instructions allow it.
  • Avoid over‑folding or crushing a fully deflated mattress during storage or moving.
  • When storing, keep the mattress clean, dry, and protected from sharp objects and extreme temperatures.
  • If the bed keeps reinflating, reduce the target firmness and then unplug the pump before moving it.

Understanding How To Deflate Sleep Number Bed safely helps protect the mattress, simplifies moving, and makes troubleshooting easier. With a calm, step‑by‑step approach—and by following any model‑specific instructions—you can deflate, move, and set up your adjustable air bed with confidence.